Jual Glass Beads Mesh 5

Jual Glass Beads Mesh 3 sampai dengan mesh 12
Jual Glass Beads Mesh 3 sampai dengan mesh 12

Jual Glass Beads Mesh 3 sampai dengan mesh 12 Glass beads are widely used for blasting and polishing purposes, can be used for cleaning the moulds for forging, casting , glass, rubber, etc., for removing of the tensile stress and increasing and improvement of the corrosion resistance and fatigue life of the component such as aircraft engine turbine blades, haft, landing gear, springs etc., for decorative finishing of the component surfaces, etc.

It is used for cleaning the turbine, blade and axle of the airplane engine
Glass bead for jetting has the features of chemical stability, high mechanical intensity and hardness. They can be jetted onto the object surface with compressed air and can be used on compress glass, rubber, plastic,Jual Glass Beads Mesh 3 sampai dengan mesh 12 moulds with metal casting or compressing. The jetting balls would help reduce elasticity of the surface materials and increase wearing capacity.

Jual Glass Beads Mesh 3 sampai dengan mesh 12
Jual Glass Beads Mesh 3 sampai dengan mesh 12
Jual Glass Beads Mesh 3 sampai dengan mesh 12

During the production of highway painting, put glass bead into paint based on the ratio of 18-25% (weight percentage), so that the highway paint can still keep reflectivity during wear and friction. The ratio is refer to the specification of Communication Industry Standard of the People’s Republic of China No. JT/T280-2004, the standards which is different in different countries and areas.
According to the specification of Communication Industry Standard of the People’s Republic of China No.GB/T24722-2009, the granulometry is shown in the table below.

Ratio:2.4-2.6g/cm3
Reflectivity:≥1.50
Roundness:≥80%
Contained ratio of magnetic particlea:≤0.1%

The appearance of glass bead should be colorless, loosen and spherical particle, should be clean without impurity, and without agglomeration

Jual Glass Beads Mesh 3 sampai dengan mesh 12
Jual Glass Beads Mesh 3 sampai dengan mesh 12

Glass microspheres, also known as glass beads, have been used for at least 100 years, which were found applications in in many industries and thousands of applications including aerospace and military materials, molded plastic components, retroreflective highway signs, oil and gas, recreation, paints and coatings, transportation, construction, mining explosives, personal care, cosmetics and consumer products, amongst others.

Jual Glass Beads Mesh 3 sampai dengan mesh 12,In recent years, glass microspheres have experienced excellent growth due to new high-value, high-growth industries that have emerged and the availability of high quality glass microspheres with perfectly sphericity, tight tolerances and particle size distributions available on the market. These industries include biomedical, life sciences, microscopy, automotive, high-tech equipment and specialty applications.

Reflective glass microspheres / beads, as a necessary material for road marking, are mainly used for road mark lines and traffic signs. It is usually classified as bellows according to its usages.
Special coated glass microspheres / beads, brighter and better in moisture proof. It is used by dropping / spraying after mark painting. The coating will increase durableness for glass microspheres / beads and better function in rainy days and moist regions.

Jual Glass Beads Mesh 10
Jual Glass Beads Mesh 10

Leave a Reply

Your email address will not be published. Required fields are marked *

error: Dilarang Copas!!